Hello all,
I want to make a Jivelite player for my daughter in law, I has already put her a RP2B with piCorePlayer 7.0 without screen.
I do all my test at home with a RPI4B+ PiCorePlayer 8.0
I have bought a WaveScreen 7' LCD (C) for this. With a fresh install, I add directly into the config.txt what is written in the waveshare documention :
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
hdmi_drive=1
Even if the boot takes the full screen resolution, when i install Jivelite and reboot, the logo piCorePlayer takes the full screen and is centered..but Jivelite display is disturbed.. like the display is displaced on the right like 2/3 of the screen and what is out of the screen is shown on the left side. But anyhow.. i have taken back the RPI2B+ at home to make some test.. I added into the config file and install Jivelite (remember it's on a pcp 7.0), and the screen look perfect.
I have tried to run the SD card with pcp 8.0 that was running on the RPI 4B+, the display is also displaced. Have you an idea why ?
But as the target is on RPI2B/pcp 7 I let this issue aside and i am facing some new issues. I have searched over the forum and didn't find something that works.
I select the Touch Skin (1024x600)
- The calibration is not correct and change from boot to boot. To try calibration I used these commands :
sudo su
export TSLIB_TSDEVICE=/dev/input/event0
export TSLIB_FBDEVICE=/dev/fb0
ts_calibrate
The process is running but nothing happens, I have still jivelite displayed
- I see that the mouse pointer is hidden after some seconds, can i reduce this time ? can i totally hide the cursor ?
- I have set to display the clock when the player is off... once it is, how can i turn it off on touching the screen ? the only way is to turn it on by the LMS.
- The VuMeter is not centered.
thank you for your help
yves
I want to make a Jivelite player for my daughter in law, I has already put her a RP2B with piCorePlayer 7.0 without screen.
I do all my test at home with a RPI4B+ PiCorePlayer 8.0
I have bought a WaveScreen 7' LCD (C) for this. With a fresh install, I add directly into the config.txt what is written in the waveshare documention :
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
hdmi_drive=1
Even if the boot takes the full screen resolution, when i install Jivelite and reboot, the logo piCorePlayer takes the full screen and is centered..but Jivelite display is disturbed.. like the display is displaced on the right like 2/3 of the screen and what is out of the screen is shown on the left side. But anyhow.. i have taken back the RPI2B+ at home to make some test.. I added into the config file and install Jivelite (remember it's on a pcp 7.0), and the screen look perfect.
I have tried to run the SD card with pcp 8.0 that was running on the RPI 4B+, the display is also displaced. Have you an idea why ?
But as the target is on RPI2B/pcp 7 I let this issue aside and i am facing some new issues. I have searched over the forum and didn't find something that works.
I select the Touch Skin (1024x600)
- The calibration is not correct and change from boot to boot. To try calibration I used these commands :
sudo su
export TSLIB_TSDEVICE=/dev/input/event0
export TSLIB_FBDEVICE=/dev/fb0
ts_calibrate
The process is running but nothing happens, I have still jivelite displayed
- I see that the mouse pointer is hidden after some seconds, can i reduce this time ? can i totally hide the cursor ?
- I have set to display the clock when the player is off... once it is, how can i turn it off on touching the screen ? the only way is to turn it on by the LMS.
- The VuMeter is not centered.
thank you for your help
yves