Hi I have read on one of the thread on this forum a user Linvincible has reported that by using the Generic I2S device and Various Input = -D he managed to get MCLK from the GPIO pinout.
*****
Details :
The release I used is PiCorePlayer, the connector is a stripped 40 pins cable and connector, from which I pulled the cables I needed and soldered them on the back of the Audio-GD I2S output module.
wiring: pin 1 goes to 3.3V power, pin 12 goes to Bit Clock (BCK), pin 34 goes to Master CLock (MCK), pin 35 goes to Frame Clock (WCK), pin 39 goes to ground and pin 40 goes to DATA.
Settings in PiCorePlayer : select standard I2S output and add -D into Various input
*****
I've tried this on the latest release but other than BCK. LRCD, Data I still unable to get MCLK from pin 34. Has anyone successfully make this work? or the latest release does not support this anymore?
I need this MCLK to get a re-clocking board working hope someone can give me some pointers.
regards
ck
*****
Details :
The release I used is PiCorePlayer, the connector is a stripped 40 pins cable and connector, from which I pulled the cables I needed and soldered them on the back of the Audio-GD I2S output module.
wiring: pin 1 goes to 3.3V power, pin 12 goes to Bit Clock (BCK), pin 34 goes to Master CLock (MCK), pin 35 goes to Frame Clock (WCK), pin 39 goes to ground and pin 40 goes to DATA.
Settings in PiCorePlayer : select standard I2S output and add -D into Various input
*****
I've tried this on the latest release but other than BCK. LRCD, Data I still unable to get MCLK from pin 34. Has anyone successfully make this work? or the latest release does not support this anymore?
I need this MCLK to get a re-clocking board working hope someone can give me some pointers.
regards
ck