Helo together,
i just started to use picoreplayer on my raspi. i use it with lms and player. works great over ethernet-cbable.
now i put in my usb wlan dongle - when i log into pico with ssh a dmesg shows:
But i cannot conigure the wlan through the web interface - it says:
"WARNINGS:
/usr/local/etc/pcp/wpa_supplicant.conf not found.
"
I uploadet the diag messages
paste name: pCP-2B-833f04-wifi
https://pastebin.com/4bvEUh0D
Thanks for some hints
Fabi
i just started to use picoreplayer on my raspi. i use it with lms and player. works great over ethernet-cbable.
now i put in my usb wlan dongle - when i log into pico with ssh a dmesg shows:
Code:
[ 5552.252089] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 5552.383241] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=7015, bcdDevice= 2.02
[ 5552.383260] usb 1-1.3: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 5552.383271] usb 1-1.3: Product: USB WLAN
[ 5552.383282] usb 1-1.3: Manufacturer: ATHEROS
[ 5552.383293] usb 1-1.3: SerialNumber: 12345
[ 5920.594086] usb 1-1.3: USB disconnect, device number 5
[ 5922.422090] usb 1-1.2: new high-speed USB device number 6 using dwc_otg
[ 5922.553322] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=7015, bcdDevice= 2.02
[ 5922.553341] usb 1-1.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 5922.553352] usb 1-1.2: Product: USB WLAN
[ 5922.553363] usb 1-1.2: Manufacturer: ATHEROS
[ 5922.553374] usb 1-1.2: SerialNumber: 12345
[ 5930.578080] usb 1-1.2: USB disconnect, device number 6
[ 5932.412100] usb 1-1.2: new high-speed USB device number 7 using dwc_otg
[ 5932.732084] usb 1-1.2: device descriptor read/64, error -71
[ 5932.983279] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=7015, bcdDevice= 2.02
[ 5932.983300] usb 1-1.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 5932.983311] usb 1-1.2: Product: USB WLAN
[ 5932.983322] usb 1-1.2: Manufacturer: ATHEROS
[ 5932.983333] usb 1-1.2: SerialNumber: 12345
[ 7145.942831] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 7145.983039] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7145.983271] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 7145.983284] cfg80211: failed to load regulatory.db
[ 7146.078872] usb 1-1.2: ath9k_htc: Firmware ath9k_htc/htc_7010-1.4.0.fw requested
[ 7146.079034] usb 1-1.2: Direct firmware load for ath9k_htc/htc_7010-1.4.0.fw failed with error -2
[ 7146.079056] usb 1-1.2: ath9k_htc: Firmware htc_7010.fw requested
[ 7146.079145] usb 1-1.2: Direct firmware load for htc_7010.fw failed with error -2
[ 7146.079158] usb 1-1.2: no suitable firmware found!
[ 7146.079167] usb 1-1.2: ath9k_htc: Failed to get firmware htc_7010.fw
[ 7146.079989] usb 1-1.2: ath9k_htc: USB layer deinitialized
[ 7146.080316] usbcore: registered new interface driver ath9k_htc"WARNINGS:
/usr/local/etc/pcp/wpa_supplicant.conf not found.
"
I uploadet the diag messages
paste name: pCP-2B-833f04-wifi
https://pastebin.com/4bvEUh0D
Thanks for some hints
Fabi