PiCoreplayer as video server??
> I've installed UPnP/DLNA Media Interface on my picoreplayer but don't > know where to put 'videos' and even if this would work. Mount a drive with the videos like you did for the music. (that...
View ArticlepiCorePlayer 7.0.1: asound.conf - Configuration
There is a nice feature under [Main Page] in [Beta] mode > [Extras] > [Asound] to configure things like volume balance and stereo/mono/swap channels. I used it in previous releases of...
View ArticlePiCorePlayer 7 and Bluetooth
Today i installed PiCorPlayer 7 on my RPI3+ to play music from my LMS to my new bluetooth speaker (JBL BoomBox). The install went smooth and also the pairing/connection to my BT-speaker is okay....
View ArticleHow to stop LMS on a Pi / access Control Panel
A dumb question - how do I stop LMS on the Pi? I can't find the control panel that I'd use in Windows to do this, and I'd rather not just terminate the process. I am trying to copy an old copy...
View ArticleWiFi issue when AP get reboot (reconnect issue)
Hi, I have the rpi4 and pcp7. It works well in wifi mode but if i restart my access point, the rpi Is not able to reconnect and i have to Power off and then power on it. I get this problem every...
View ArticleWaiting for soundcard to populate failure (JustBoom Digi Hat)
With my aging SB3 going into "reboot after starting playing" mode (since fixed with a capacitor change), I looked for an alternative and found piCorePlayer. I quickly put together a system with a 7"...
View ArticlepiCorePlayer 7.0.0 doesn't play well with HiFiBerry DAC2 Pro
I'm making my first attempt at building a "Squeezebox replacement," and so put together a RPi 4 and HiFiBerry DAC2 Pro. I tried using piCorePlayer 7.0.0, and it worked fine with "Analog Audio" as the...
View ArticleCannot allocate FULL 4GB Buffer Size in Squeezelite on RPi 8GB
Hey Guys, This is just a buffer memory size question. Please leave SQ discussion or opinions for another thread. Just trying to troubleshoot. I'm out of if their is a hint of someone injecting their SQ...
View ArticleClik here to view.
pCP Network Disk Mount settings for VortexBox Appliance and LMS question
Hi All, I'm looking to replace an ailing SB Classic via the Raspberry Pi / piCorePlayer route. I'm completely new to both, and most of the tutorials I've seen online involve music stored on a USB drive...
View ArticleLMS with squeezelite and piCorePlayer sync Problems
I use a Raspberry pi 3 with LMS and Squeezelite and 2 Raspberry Pi with piCorePlayer. This setup is running since several years stable. All PI’s are connected via LAN. Most of the time I hear Webradio...
View ArticlePiZero W + Picoreplayer 7.0.1 Wifi Issues
Having a strange issue. I've had a three Pi3b+ units with Hifiberry dac's installed in the house for awhile, and they work wonderfully over wifi. They are running PicoReplayer 7.0.1 (upgraded from 6 in...
View ArticleOdd behaviour when enabling Samba (PcP 7)
Funny - exact the same setup and programs and pCP 7.0.1 and never had these problems. OK - The backups are at midnight where I usually do not listen to Music, so I canât say if it occurs during...
View ArticleHelp..rpi4 and WAP fail to download......and pi4 lms/squeezelite standalone...
Hello.. On my rpi4 (2gb) no mater what I do .....fresh pcp 7.0 64 bit installs and/or anywhere along the process of installing lms, resizing partitions, etc I cannot successfully execute the WAP...
View ArticleNew Five Inch Screen Problems
Hello I have just got a 5" HDMI screen 800 x 480 for pCP7. There is a slight problem with lack of width in Jivelite with all skins except Touch Skin 1024 x 600, this skin is getting a bit small to read...
View Articlehelp -know when song is almost over because there comes a little garble, some...
Hi NoobNR7 I believe you should start over by describing the problem you're having in just a line or two. Then add information about your LMS version, pCP version, player hardware, Squeezelite version...
View ArticleSave and restore profiles for Squezzelite on piCorePlayer (7.0.1)
I have multiple (4) dac on different room and move piCorePlayer on Rpi4. I would like to be able to have multiple "profiles" for squezzelite and being able to reload and save to switch from one config...
View Article[BBB] Squeezelite working only when manually started from command line
Greetings! Perhaps someone can point me to the right direction with the following issue: I am trying to use some Beaglebone Blacks as network music players using squeezelite but for some reason...
View ArticleLow volume using shairport-sync with picoreplayer
Installed shairport-sync through picoreplayers tweaks menu to enable airplay support. After some configuration I got it working with my active bookshelf speakers. However, the max volume is much lower...
View ArticleSimple Linux OS for Jivelite, LMS on PC
Hello Is there a simple linux OS that will run Jivelite and LMS on a PC. Something like pCP but for a PC. I do run Daphile but I would like Open Source to tinker with. The world is awash with very...
View ArticleClik here to view.
retrieve brightness from squeezelite to drive an oled screen
Hi, Short question: I'd like to retrieve player brightness value that should be sent by LMS to squeezelite via Slimproto "grfb" command. Is there an easy way to do it without patching squeezelite? If I...
View Article